Product Introduction
PTFE lining is made of a layer of PTFE lining in the rubber joint, PTFE which can resist strong acid and alkali. It can be used in chemical industry and sewage transportation. The rubber joint has the characteristics of high pressure resistance, good elastic strength, large compensation displacement, pipeline deviation of balanced transportation system, vibration transmission between absorption pipelines, good noise reduction effect, convenient installation, etc.
Advantages of PTFE lined rubber expansion joints
1. PTFE rubber expansion joint is lined with high pressure, high temperature and oil resistance.
2. PTFE lined rubber expansion joint is wear-resistant, corrosion resistant, acid and alkali resistant.
3. Connect with pumps, valves, fire-fighting equipment, pipes with large vibration, and pipes with frequent changes in cold and heat.
4. Long service life
5. Reduce vibration and noise
Product Applications
1. Petrochemical industry
2. Pharmaceutical and food processing industries
3. Aviation, aerospace, electronic and electrical industries
4. Construction industry
Product parameters
| NO | NAME | MATERIAL |
| 1 | Outer rubber layers | NR,NBR,EPDM,etc. |
| 2 | Inner rubber layers | NR, NBR, EPDM, etc |
| 3 | Pressurized ring | Steel wire strand |
| 4 | Flange | SS304,SS316,carbon steel |
| 5 | Lined | PTFE |
| Main connection dimension |
| mm | Inch | Length
(mm)
| Axial displacement(mm) | Horizontal movement
| Deflection angle
| Special length
|
| Compression | Extension |
| 32 | 1 1/4 | 95 | 9 | 6 | 9 | 15° | 130/150/200 |
| 40 | 1 1/2 | 95 | 10 | 6 | 9 | 15° | 130/150/200 |
| 50 | 2 | 105 | 10 | 7 | 10 | 15° | 130/150/200 |
| 65 | 2 1/2 | 115 | 13 | 7 | 11 | 15° | 130/150/200 |
| 80 | 3 | 135 | 15 | 8 | 12 | 15° | 130/150/200 |
| 100 | 4 | 150 | 19 | 10 | 13 | 15° | 130/200 |
| 125 | 5 | 165 | 19 | 12 | 13 | 15° | 130/150/200 |
| 150 | 6 | 180 | 20 | 12 | 14 | 15° | 130/150/200 |
| 200 | 8 | 210 | 25 | 16 | 22 | 15° | 130/150/200 |
| 250 | 10 | 230 | 25 | 16 | 22 | 15° | 130/150/200 |
| 300 | 12 | 245 | 25 | 16 | 22 | 15° | 130/150/200 |
| 350 | 14 | 255 | 25 | 16 | 22 | 15° | 130/150/200 |
| 400 | 16 | 255 | 25 | 16 | 22 | 15° | 130/150/200 |
| 450 | 18 | 255 | 25 | 16 | 22 | 15° | 200 |
| 500 | 20 | 255 | 25 | 16 | 22 | 15° | 200 |
| 600 | 24 | 260 | 25 | 16 | 22 | 15° | 300 |
| 700 | 28 | 260 | 25 | 16 | 22 | 15° | 300 |
| 800 | 32 | 260 | 25 | 16 | 22 | 15° | 300 |
| 900 | 36 | 260 | 25 | 16 | 22 | 15° | 300 |
| 1000 | 40 | 260 | 26 | 18 | 24 | 15° | 300 |
| 1200 | 48 | 260 | 26 | 18 | 24 | 15° | 300 |
Product display from different angles
Different types of rubber joints
Installation instructions
1.Rubber soft joints in installation is strictly prohibited over displacement limit installation.
2.Flat,suspended,vertical installation of rubber joints,supporting force of pipeline working pressure less than the axial displacement of the rubber joint,you should install anti pull off device,to prevent the work pressure.
3.The pipeline must have a fixed support or fixed bracket,the fixed bracket force must be greater than the axial force.Vertical installation and overhead installation products both ends need to install the corresponding fixed bracket and force support,to prevent the compression.
4.The installation bolts should be symmetrical,gradually tightened to prevent partial leakage.
5.The installation should be away from the heat source,strictly prohibit the use of products that do not meet the requirements of the media.
Lots of inventory
Why choose us?
1. 24-hour online service - provide you with what you need anytime, anywhere
2. 100% quality inspection before shipment
3. Reasonable and competitive price
4. Strong production capacity, strict quality control, to provide satisfactory service
5. Years of export experience
6. We accept small order quantity and provide customized service
7. 12 months after-sales service
Product Tags:
|
|
SS304/SS316 custom flange connection PTFE natural rubber expansion joint Images
|
